Trafox SUPERINTEND IM-01.IND Скачать руководство пользователя страница 17 | Manualshive

Страница: 17 / 50

Trafox SUPERINTEND IM-01.IND Скачать руководство пользователя страница 17

Superintend IMD

© Copyright Muuntosähkö Oy - Trafox

17

http://www.trafox.fi

Moving to the next parameter on the menu level and screen level. Reduces the
parameter on the edit level. In the AutoScroll mode, stops the display.

Moving to the previous parameter on the menu level and screen level. Increases
the parameter on the edit level. In the AutoScroll mode, stops the display.

Moving to the next menu on the main level. Moves to the next editable
parameter on the edit level.

A general “approval button”. On the menu level, takes you to the AutoScroll or

edit mode. On the edit level, approves the changes made. Pressing the button
in the first three items of the Monitor menu and approving the start of the test
begins the system test.

A general “reject button”. Returns to the previous mode from all modes.

Pressing the B button an appropriate number of times takes you to the default
mode of the main menu (insulation resistance/capacitance) from any mode.

MONITOR MENU

The Monitor menu is the default menu of the IM-01.IND unit during use. All modes of the
menu always return to the topmost item on the Monitor menu after 20 minutes from the
last press of a button.

The following measured parameters are available in the Monitor menu screen:

•

IT network’s insulation resistance and capacitance in relation to protective earth.

Displayed in kOhms and micro farads.

•

Temperature of the isolation transformer in degrees.

•

Secondary current of the isolation transformer. Displayed in a percentage of the

transformer’s nominal current.

•

The number of the TC-01, IC-01 and PEC-01 units configured in the system and,
if needed, the software versions of the units and IM-01.IND.

•

The manual resistance measurement of the PEC-01 units can be started.

«
...
15
16
17
18
19
...
»

Содержание SUPERINTEND IM-01.IND



















































Отзывы:

Нет отзывов