Tractel tirak L 500 P Series, Оригинальное руководство по сборке и эксплуатации

Страница: 16 / 208

Installation and operating manual
EN-16 G1035.4 – 01/2019
1.2 Symbols used in this manual
DANGER!
Type and source of danger
Result: e.g. death or severe injuries.
–
Measures that must be taken to eliminate the danger.
ATTENTION!
Type and source of danger
Result: e.g. equipment or environmental damage.
–
Measures that must be taken to eliminate any possible damage.
Note:
This symbol is not used to indicate safety information but to indicate information that will give you a better understanding of the
working procedures.
This symbol identifies devices for transport of material.
This symbol identifies devices for transporting people and materials.
2 Safety
2.1 General safety instructions
DANGER!
Danger of severe injuries caused by malfunctions, incorrect use and incorrect operation!
– You must abide by the following instructions in order to ensure safe operation and correct functioning of the equipment!
– Please observe the special safety instructions for all of the work to be performed as described in the individual chapters in
this manual.
– Never use faulty or damaged products, accessories or suspension rigs.
– Never use wire ropes that are not the specified original wire ropes or approved for this hoist by the manufacturer Tractel. Abide by
the details about the wire rope type and diameter.
– Wire rope and products in contact with the wire rope and suspension rig must not be soiled by heavily soiling building materials
such as concrete, epoxy resin or other adhesive materials. Protect the products against soiling! Always use brushes to clean the
wire rope in an extremely dirty environment.
– If sand-blasting or painting work is carried out in the vicinity of the hoist, cover the hoists so that the effectiveness of the brake is
not impaired.
– Abide by the wire rope's withdrawal criteria, see § 8.
– Clean regularly.
– Check that all of the screw connections are tight.