Printed in the Federal Republic of Germany
TR-Electronic GmbH 2008, All Rights Reserved
06/27/2017
TR - ECE - BA - DGB - 0073 - 07
Page 147 of 155
9.3
Read/Write of attributes with Rockwell Control “RSLogix5000”
For the following project example the Rockwell Control System “RSLogix5000” V16
was used, with “ControlLogix Controller 1756-L55”.
It is assumed that the hardware configuration has already taken place, an
EtherNet/IP
™ project exists and you should be able to create variables to store
receive data.
9.3.1 Procedure
1. Create a new module under the folder structure
I/O Configuration
and choose
the entry
ETHERNET-MODULE Generic Ethernet Module
.
2. Perform the following adjustments in the
Module Properties
dialog box:
●
Comm Format
: Input Data - DINT
●
Input
: 101,
Size
: 2, corresponds attribute
Position 64
of the Assembly
Object
●
Output
: 100, corresponds attribute
Heartbeat
of the Assembly Object
●
Configuration
: 1,
Size
: 0, not supported
●
IP Address
: active IP address of the measuring system
Under the folder structure
I/O Configuration
-->
Ethernet
the module created
newly is displayed with the stored name.
