Device description / start-up
Printed in the Federal Republic of Germany
©
TR-Electronic GmbH 1997, All Rights Reserved
03/04/2010
TR - ECE - BA - GB - 0009 - 08
Page 17 of 45
3.7 Device master file
For encoders with version 3.x, the device master file of the encoder has the filename
TR03AAAB.GSD. Because of the extended performance range, for devices with
version 4 and up the file
*
TR05AAAB.GSD was created.
For users of older Siemens masters, there is also a so-called type file called
TRAAAB3X.200 which fulfils the same function as the device master file
TR03AAAB.GSD, but has a special data format.
To find out how to integrate these files into the system configuration, please refer to
the documentation of the configuration program for the Profibus master.
The encoder also has two bitmap files named TRAAAB3N.BMP and TRAAAB3S.BMP
or TRAAAB5N.DIP and TRAAAB5S.DIP which represent the encoder in the normal
and faulty states respectively. These images also have to be integrated into the
system configuration according to the instructions of the relevant documentation.
* Usable as of COMPROFIBUS version 5.0 (S5) or STEP7 as of version 5.0 service
pack 3 (S7).
The file TR05AAAB.GSD causes:
-
4 byte parameter (see also notes on page 27)
(no partitioning into high and low word at decimal input)
-
Extended performance range
-
Teach In
-
Limit switches
-
switchable diagnostic length
-
switchable units for rev. per min
see also chapter "New in firmware versions 4.x opposite 3.x", page 45.
