47
Chapter 4
Configure the Router as a Standard Wireless Router
•
ICMP-FLOOD Packets Threshold (5~3600)
- The default value is 50. Enter a value
between 5 ~ 3600. When the number of the current ICMP-FLOOD packets is beyond
the set value, the router will startup the blocking function immediately.
•
Enable UDP-FLOOD Filtering
- Tick the checkbox to enable or disable this function.
•
UDP-FLOOD Packets Threshold (5~3600)
- The default value is 500. Enter a value
between 5 ~ 3600. When the number of the current UPD-FLOOD packets is beyond
the set value, the router will startup the blocking function immediately.
•
Enable TCP-SYN-FLOOD Attack Filtering
-Tick the checkbox to enable or disable this
function.
•
TCP-SYN-FLOOD Packets Threshold (5~3600)
- The default value is 50. Enter a value
between 5 ~ 3600. When the number of the current TCP-SYN-FLOOD packets is
beyond the set value, the router will startup the blocking function immediately.
•
Forbid Ping Packet From WAN Port
- The default setting is enable. If disabled, the ping
packet from the internet can access the router.
•
Forbid Ping Packet From LAN Port
- The default setting is disabled. If enabled, the
ping packet from LAN cannot access the router. This function can be used to defend
against some viruses.
3. Click
Save
.
4. Click
Blocked DoS Host List
to display the DoS host table by blocking.
4. 8. 3. Local Management
1. Visit
http://tplinkwifi.net
, and log in with the username and password you set for the
router.
2. Go to
Security
>
Local Management
, and you can block computers on the LAN from
accessing the router.
For example
, if you want to allow PCs with specific MAC addresses to access the router’s
web management page locally from inside the network, please follow the instructions
below:
