12
Chapter 2
Connect to the Internet
Note: If the login page does not appear, please refer to the FAQ section.
3 ) After successful login, click
Next
to start the Quick Setup. Select
Repeater/
Bridge
and follow the step-by-step instructions to complete the initial
configuration.
6.
Relocate:
Place the router between your host router and the Wi-Fi dead zone. The
location you choose must be within the range of your existing host network.
Extended Network
Host Network
Client
Host Router
High Power Router
7.
Enjoy!
The extended network shares the same SSID (Network Name) and password
as your host network.
2. 2. 4. Access Point Mode
This mode transforms your existing wired network to a wireless one.
Client
High Power Router
Wired Host Router
Ethernet4
Ethernet3
Ethernet1
Ethernet2
Internet
Ethernet4
Ethernet3
Ethernet1 Ethernet2
1. Connect the router to your wired host router’s Ethernet port via an Ethernet cable as
shown above and turn on the router.
2. Connect a computer to the router via an Ethernet cable or wirelessly by using the
SSID (network name) and password printed on the bottom label of the router.
