TP-Link TD-W8950ND, Руководство пользователя

Страница: 46 / 108

TD-W8950ND 150Mbps Wireless N ADSL2+ Modem Router User Guide
3. Enter the Trigger Port Start , Trigger Port End , Open Port Start and Open Port End in the
table, and then select the Trigger protocol and Open protocol , TCP , UDP or All .
4. Click Save/Apply to enable the settings and then you will see your settings as shown in
Figure 4-27.
)
Note:
If you select the application from the drop-down list, the External Port Start, External Port End,
Internal Port Start, Internal Port End and the Protocol will be added in the table automatically.
4.4.5.3 DMZ Host
Choose “ Advanced Setup ” Æ “ NAT ” Æ “ DMZ Host ”, you can set up DMZ Host on the screen
(shown in Figure 4-29).
The DMZ host feature can make a local host be exposed to the Internet for a special-purpose
service, such as online gaming or video conferencing.
Figure 4-29
To add a new DMZ Host:
You can enter the computer's IP address and then click Save/Apply to activate the DMZ host you
set on this page.
)
Note:
DMZ host forwards all the ports at the same time. Any PC whose port is being forwarded must
have its DHCP client function disabled and should have a new static IP Address assigned to it
because its IP Address may change while using the DHCP function.
4.4.5.4 ALG
Choose “ Advanced Setup ” Æ “ NAT ” Æ “ ALG ”, and then you can configure the basic security in the
screen as shown in Figure 4-29.
38