TD-W8950ND
150Mbps Wireless N ADSL2+ Modem Router User Guide
Figure 4-14
¾
Remove All:
Click
Remove All
, then all the interface will be deleted in the table.
¾
Remove:
Select the check box in the table above and then click
Remove
, the corresponding
interface will be deleted in the table.
4.4.2.2 ATM-EoA-IPoE
If your ISP provides an
IPoE
connection and you need to use an ATM Interface, follow the steps
below to add a WAN service over a selected ATM interface:
1. Add
a
new
ATM interface and select
EoA
option for DSL Link Type (
4.4.1.1 ATM interface
).
2. Click
the
Add
button on the screen (as shown Figure 4-7). Select WAN Service Interface over
ATM PVC on the next screen (as shown Figure 4-8).
3. If your ISP provides an IPoE connection, select
IP over Ethernet
option for the
WAN service
type
on the screen (as shown Figure 4-9), and click
Next
button to continue.
4. Enter parameters in the following blanks to configure the WAN IP Address and click
Next
.
Figure 4-15
¾
Obtain an IP address automatically:
Select this option, the modem router will be able to
obtain IP network information dynamically from a DHCP server provided by your ISP.
26
