TD-W8950ND
150Mbps Wireless N ADSL2+ Modem Router User Guide
¾
Deny
: Block the PCs to access the specified URL.
To add a URL Filter entry:
1. Check
the
Deny
or
Allow
radio button. Here we take
Deny
for example.
2. Click
the
Add
button in Figure 4-39 and then you will see the next screen as shown in Figure
4-40. Enter the URL Address and Port Number.
Figure 4-40
3. Click
Save/Apply
to save this entry and then you will see your settings as shown in Figure
4-39. Every computer connected to the router will not access this URL address on the port.
4.4.8 Quality of Service
Choose “
Advanced Setup
”
Æ
“
Quality of Service
”, you can enable QoS (Quality of Service) on
the screen shown in Figure 4-41. QoS helps to prioritize data as it enters your router. By attaching
special identification marks or headers to incoming packets, QoS determines which queue the
packets enter, based priority. This is useful when there are certain types of data you want to give
higher priority, such as voice data packets give higher priority than Web data packets. This option
will provide better service of selected network traffic over various technologies.
Figure 4-41
Select the
Enable QoS
checkbox to enable all QoS for all interfaces.
Select a
Default DSCP make
from drop-down list to automatically mark incoming traffic without
reference to a particular classifier.
Click
Save/Apply
to save the current configuration.
)
Note:
The default DSCP mark is used to mark all egress packets that do not match any classification
rules.
44
