TP-Link TD-W8950ND, Руководство пользователя

Страница: 56 / 108

TD-W8950ND 150Mbps Wireless N ADSL2+ Modem Router User Guide
)
Note:
The Total Upstream Bandwidth and Total Downstream Bandwidth are required to be configured.
4.4.9.1 Rule List
Choose “ Advanced Setup ”
Æ
“ Bandwidth Control ”
Æ
“ Rule List ” and then you will see the
screen as shown in Figure 4-47. This page allows you to view and configure TC rules.
Figure 4-47
To add a TC rule, click the Add button and you can configure it in the screen as shown in Figure
4-48.
Figure 4-48
¾ Rule Status : Select the status of the rule from the drop-down list to enable or disable the rule.
¾ IP Range : Enter a single IP address or a range of IP addresses.
¾ Port Range : Enter a single port or a range of ports.
¾ Protocol : Select a protocol type from the drop-down list. TCP, UDP and ALL are available
here.
¾ Priority : Select priority form the drop-down list. There are five options: Highest, 1, 2, 3, 4, 5, 6
and Lowest. The default precedence of the rule is 4.
¾ Upstream : Enter the min and max upload speed through the WAN port.
¾ Downstream : Enter the min and max download speed through the WAN port.
After completing the above configuration, click the Save/Apply button to make it take effect and
then you will see the following list as shown in Figure 4-49. If you want to modify the rule, click the
48