VN/UN564:1VN/UN5674
LgvUvtgco" N4" Ocpcigf" Uykvej" ENK" Iwkfg
79
Rctcogvgt"
buffer | flash —The output channels: buffer and flash. Clear the information of
the two channels, by default.
Eqoocpf"Oqfg"
Global Configuration Mode
Gzcorng"
Clear the information in the log file:
VN/UN564:*%engct
nqiikpi
buffer
"
nqiikpi"jquv"kpfgz"
Fguetkrvkqp"
The
"nqiikpi"jquv"kpfgz
command is used to configure the Log Host. To clear
the configuration of the specified Log Host, please use
"pq"nqiikpi"jquv"kpfgz
command. Log Host is to receive the system log from other devices. You can
remotely monitor the settings and operation status of other devices through the
log host.
U{pvcz"
nqiikpi"jquv"kpfgz"
idx
host-ip
level
pq"nqiikpi"jquv"kpfgz
idx
Rctcogvgt"
idx
——The index of the log host. The switch supports 4 log hosts.
host-ip
—— The IP for the log host.
level
——The severity level of the log information sent to each log host. There
are 8 severity levels marked with values 0-7. The smaller value has the higher
priority. Only the log with the same or smaller severity level value will be sent to
the corresponding log host. By default, it is 6 indicating that the log information
marked with 0~6 will be sent to the log host.
Eqoocpf"Oqfg"
Global Configuration Mode
