VN/UN564:1VN/UN5674
LgvUvtgco" N4" Ocpcigf" Uykvej" ENK" Iwkfg
11
Oqfg"
Ceeguukpi"Rcvj"
Rtqorv"
Nqiqwv"qt"Ceeguu"vjg"pgzv"oqfg
VLAN
Configuration
Mode
Use the
xncp"
vlan-list
command to enter this
mode from Global
Configuration mode.
VN/UN564:*eqphki/"
xncp+%
Use the
gpf
command or press
Evtn-\
to
return to Privileged EXEC mode.
Enter the
gzkv"
or
"%
command to return to
Global configuration mode.
Pqvg<"
1. The user is automatically in User EXEC Mode after the connection between the PC and the
switch is established by a console port or by a telnet connection.
2. Each command mode has its own set of specific commands. To configure some commands,
you should access the corresponding command mode firstly.
Inqdcn"Eqphkiwtcvkqp"Oqfg
: In this mode, global commands are provided, such as the
Spanning Tree, Schedule Mode and so on.
Kpvgthceg"Eqphkiwtcvkqp"Oqfg
: In this mode, users can configure one or several ports.
Different ports correspond to different commands
"
a). Interface fastEthernet/gigabitEthernet: Configure parameters for a Fast/Gigabit
Ethernet port, such as Duplex-mode, flow control status.
"
b). Interface range fastEthernet/gigabitEthernet: Configure parameters for several
Ethernet ports.
"
c). Interface link-aggregation: Configure parameters for a link-aggregation, such as
broadcast storm.
"
d). Interface range link-aggregation: Configure parameters for multi-trunks.
"
e). Interface vlan: Configure parameters for the vlan-port.
"
Xncp"Eqphkiwtcvkqp"Oqfg
: In this mode, users can create a VLAN and add a specified
port to the VLAN.
"
3. Some commands are global, that means they can be performed in all modes:
ujqy
: Displays all information of switch, for example: statistic information, port
information, VLAN information.
jkuvqt{
: Displays the commands history
.
305" " Ugewtkv{"Ngxgnu"
This switch’s security is divided into two levels: User level and Admin level.
