VN/UN564:1VN/UN5674
LgvUvtgco" N4" Ocpcigf" Uykvej" ENK" Iwkfg
131
queues and scheduling algorithms you set. On this switch, the priority levels are
labeled as TC0, TC1… TC3.
U{pvcz"
squ"swgwg"oqfg"
{ sp | wrr | sp+wrr | equ }
pq"squ"swgwg"oqfg
Rctcogvgt"
sp —— Strict-Priority Mode. In this mode, the queue with higher priority will
occupy the whole bandwidth. Packets in the queue with lower priority are sent
only when the queue with higher priority is empty.
wrr —— Weight Round Robin Mode. In this mode, packets in all the queues are
sent in order based on the weight value for each queue. The weight value ratio
of TC0, TC1, TC2 and TC3 is 1:2:4:8.
sp+wrr —— Strict-Pr Weight Round Robin Mode. In this mode, the switch
provides two scheduling groups, SP group and WRR group. Queues in SP
group and WRR group are scheduled strictly based on Strict-Priority mode while
the queues inside WRR group follow the WRR mode. In SP + WRR mode, TC3
is the SP group; TC0, TC1 and TC2 belong to the WRR group and the weight
value ratio of TC0, TC1 and TC2 is 1:2:4. In this way, when scheduling queues,
the switch allows TC3 to occupy the whole bandwidth following the SP mode
and the TC0, TC1 and TC2 in the WRR group will take up the bandwidth
according to their ratio 1:2:4.
equ —— Equal-Mode. In this mode, all the queues occupy the bandwidth
equally. The weight value ratio of all the queues is 1:1:1:1.
Eqoocpf"Oqfg"
Global Configuration Mode
Gzcorng"
Specify the Schedule Mode as Weight Round Robin Mode:
"
VN/UN564:*%squ"swgwg"oqfg"
wrr
ujqy"squ"kpvgthceg"
Fguetkrvkqp"
The
ujqy"squ"kpvgthceg
command is used to display the configuration of QoS
based on port priority.
"
