VN/UN564:1VN/UN5674
LgvUvtgco" N4" Ocpcigf" Uykvej" ENK" Iwkfg
6
6. The DOS prompt” TL-SL3428>” will appear after pressing the
" Gpvgt
shown. It indicates that you can use the CLI now.
Figure 1-5 Log in the Switch
30304" " Nqiqp"d{"Vgnpgv"
To successfully create Telnet connection, firstly CLI commands about configuring Telnet login
mode, login authentication information and Privileged EXEC Mode password should be configured
through Console connection.
Telnet login has the following two modes, you can choose one according to your needs:
Nqikp"Nqecn"Oqfg<"
It requires username and password, which are both
cfokp"
by default.
Nqikp"Oqfg
: It requires no username and password, but a connection password is required.
Pqvg<"
1. Before Telnet login, you are required to configure Telnet login mode and login
authentication information through
Eqpuqng" eqppgevkqp
. The relevant CLI commands
should be entered in the prompted DOS screen shown in Figure 1-5 Log in the Switch.
2. You will enter to User EXEC Mode after Telnet connection is successfully created, but for
switch security concerns, you are required to set a password which functions to further
access to Privileged EXEC Mode when you configure the login mode.
Nqikp"Nqecn"Oqfg<
Firstly, configure the Telnet login mode as “
nqikp"nqecn
fi
"
and set the password
"
for entering into the
Privileged EXEC Mode
"
as
345"
in the prompted DOS screen shown in Figure 1-5.
Figure 1-6 Configure login local mode