VN/UN564:1VN/UN5674
LgvUvtgco" N4" Ocpcigf" Uykvej" ENK" Iwkfg
135
oqpkvqt"uguukqp"uqwteg"kpvgthceg"
Fguetkrvkqp"
The
"
oqpkvqt" uguukqp" uqwteg
kpvgthceg
command is used to configure the
monitored port. To delete the corresponding monitored port, please use
" pq
oqpkvqt"uguukqp"uqwteg
kpvgthceg
command.
U{pvcz"
oqpkvqt" uguukqp"
session_num
uqwteg
kpvgthceg
{
hcuvGvjgtpgv
port-list
|
ikicdkvGvjgtpgv
port-list
}
mode
pq" oqpkvqt" uguukqp"
session_num
uqwteg
kpvgthceg
{
hcuvGvjgtpgv
port-list
|
ikicdkvGvjgtpgv
port-list
}
mode
Rctcogvgt"
session_num
—— The monitor session number, the value of which is 1.
port-list
—— List of monitored port. It is multi-optional.
mode
—— The monitor mode. There are three options: rx, tx and both. Rx
(ingress monitoring mode), means the incoming packets received by the
monitored port will be copied to the monitoring port. TX (egress monitoring
mode), indicates the outgoing packets sent by the monitored port will be copied
to the monitoring port. Both (ingress and egress monitoring), presents the
incoming packets received and the outgoing packets sent by the monitored port
will both be copied to the monitoring port.
Eqoocpf"Oqfg"
Global Configuration Mode
Wugt"Iwkfgnkpgu"
1. The monitoring port is corresponding to current interface configuration
mode.
2. Monitored ports number is not limited, but it can’t be the monitoring port at
the same time.
3. Whether the monitoring port and monitored ports are in the same VLAN or
not is not demanded strictly.
4. The monitoring port and monitored ports cannot be link-aggregation
member.
Gzcorng"
Create monitor session 1, then configure Fast Ethernet port 4, 5, 7 as monitored
ports and enable ingress monitoring:
