VN/UN564:1VN/UN5674
LgvUvtgco" N4" Ocpcigf" Uykvej" ENK" Iwkfg
114
Wugt"Iwkfgnkpgu" "
Command in the
" Kpvgthceg" Tcpig" hcuvGvjgtpgv"
Mode is executed
independently on all ports in the range. It does not effect the execution on the
other ports at all if the command results in an error on one port.
Gzcorng"
To enter the Interface Range fastEthernet Configuration Mode, and configure
ports 1, 2, 3, 6, 7 and 9 at the same time by adding them to one port-list:
VN/UN564:*%kpvgthceg"tcpig"hcuvGvjgtpgv"
1/0/1-3,1/0/6-7,1/0/9
"
kpvgthceg"ikicdkvGvjgtpgv
Fguetkrvkqp"
The
kpvgthceg" ikicdkvGvjgtpgv"
command is used to enter the interface
gigabitEthernet Configuration Mode and configure the corresponding Gigabit
Ethernet port.
U{pvcz"
kpvgthceg"ikicdkvGvjgtpgv
port
Rctcogvgt"
port
—— The Fast/Gigabit Ethernet port number.
Eqoocpf"Oqfg"
Global Configuration Mode
Gzcorng"
To enter the Interface gigabitEthernet Configuration Mode and configure Gigabit
Ethernet port 25:
VN/UN564:*%kpvgthceg"ikicdkvGvjgtpgv"
1/0/25
"
kpvgthceg"tcpig"ikicdkvGvjgtpgv"
Fguetkrvkqp"
The
kpvgthceg"tcpig"ikicdkvGvjgtpgv"
command is used to enter the interface
range gigabitEthernet Configuration Mode and configure multiple Gigabit
Ethernet ports at the same time.
U{pvcz"
kpvgthceg"tcpig"ikicdkvGvjgtpgv
port-list
