VN/UN564:1VN/UN5674
LgvUvtgco" N4" Ocpcigf" Uykvej" ENK" Iwkfg
207
Gzcorng"
Enable NDP function globally, and configure Aging Time as 120 seconds, Hello
Time as 50 seconds:
VN/UN564:*%enwuvgt"pfr" "
VN/UN564:*%enwuvgt"pfr"vkogt"jgnnq"
50
cikpi"
120
"
enwuvgt"pvfr
"
Fguetkrvkqp"
The
enwuvgt"pvfr
command is used to configure NTDP globally. To return to the
default configuration, please use
pq" enwuvgt" pvfr
command. NTDP (Neighbor
Topology Discovery Protocol) is used to collect the NDP information and
neighboring connection information of each device in a specific network range. It
provides the commander switch with the information of devices which can join
the cluster and collects topology information of devices within the specified hops.
U{pvcz"
enwuvgt"pvfr"
enwuvgt"pvfr"vkogt
{ [
kpvgtxcn/vkog"
time
] [
jqr/fgnc{
value
]
"
[
rqtv/fgnc{
value
] }
"
enwuvgt"pvfr"jqr
hop-value
"
pq"enwuvgt"pvfr" "
pq" enwuvgt" pvfr" vkogt"
{ [
kpvgtxcn/vkog"
time
] [
jqr/fgnc{
value
]
"
[
rqtv/fgnc{
value
] }
"
pq"enwuvgt"pvfr"jqr
hop-value
"
Rctcogvgt"
time
—— NTDP Interval Time, which is the interval to collect topology information.
NTDP Interval Time ranges from 1 to 60 in minutes. By default, it is 1.
jqr/fgnc{
value
—— NTDP Hop Delay, which is the time between the switch
receiving NTDP request packets and the switch forwarding NTDP request
packets for the first time. NTDP Hop Delay ranges from 1 to 1000 in
milliseconds. By default, it is 200.
rqtv/fgnc{
value
—— NTDP Port Delay, which is the time between the port
forwarding NTDP request packets and its adjacent port forwarding NTDP
request packets over. NTDP Port Delay ranges from 1 to 100 in milliseconds. By
default, it is 20.
