VN/UN564:1VN/UN5674
LgvUvtgco" N4" Ocpcigf" Uykvej" ENK" Iwkfg
12
User level only allows users to do some simple operations in User EXEC Mode; Admin level
allows you to monitor, configure and manage the switch in Privileged EXEC Mode, Global
Configuration Mode, Interface Configuration Mode and VLAN Configuration Mode.
Users get the privilege to the User level once connecting console port with the switch or logging in
by Telnet. However, Guest users are restricted to access the CLI.
Users can enter Privileged EXEC mode from User EXEC mode by using the
gpcdng"
command. In
default case, no password is needed. In Global Configuration Mode, you can configure password
for Admin level by
gpcdng"rcuuyqtf"
command. Once password is configured, you are required to
enter it to access Privileged EXEC mode.
306" " Eqpxgpvkqpu"
30603" " Hqtocv"Eqpxgpvkqpu"
The following conventions are used in this Guide:
Items in square brackets [ ] are optional
Items in braces { } are required
Alternative items are grouped in braces and separated by vertical bars. For example:
urggf"
{10 | 100 | 1000
"
}
Bold indicates an unalterable keyword. For example:
"ujqy"nqiikpi
Normal Font indicates a constant (several options are enumerated and only one can be
selected). For example:
"uykvejrqtv"v{rg
{ access | trunk | general }
Italic Font indicates a variable (an actual value must be assigned). For example:
dtkfig"
cikpi/vkog"
aging-time
30604" " Urgekcn"Ejctcevgtu"
You should pay attentions to the description below if the variable is a character string:
These six characters ” < > , \ & can not be input.
If a blank is contained in a character string, single or double quotation marks should be used,
for example ’hello world’, ”hello world”, and the words in the quotation marks will be identified
as a string. Otherwise, the words will be identified as several strings.
30605" " Rctcogvgt"Hqtocv" "
Some parameters must be entered in special formats which are shown as follows:
