Configuration Procedure:
Step Operation
Description
1
Bind the IP address, MAC
address, VLAN ID and the
connected Port number of
the Host together.
Required. On the
IP-MAC Binding
page, bind the IP
address, MAC address, VLAN ID and the connected Port
number of the Host together via Manual Binding, ARP
Scanning or DHCP Snooping.
2
Enable the protection for the
bound entry.
Required. On the
Network Security
→
IP-MAC
Binding
→
Binding Table
page, specify a protect type for
the corresponding bound entry.
3
Specify the trusted port.
Required.
On
the
Network Security
→
ARP
Inspection
→
ARP Detect
page, specify the trusted port.
The specific ports, such as up-linked port, routing port
and LAG port, should be set as Trusted Port.
4
Enable ARP Detect feature.
Required.
On
the
Network Security
→
ARP
Inspection
→
ARP Detect
page, enable the ARP Detect
feature.
12.2.2 ARP Defend
With the ARP Defend enabled, the switch can terminate receiving the ARP packets for 300
seconds when the transmission speed of the legal ARP packet on the port exceeds the defined
value so as to avoid ARP Attack flood.
Choose the menu
Network Security
→
ARP Inspection
→
ARP Defend
to load the following page.
166
