Figure 12-4 ARP Scanning
The following entries are displayed on this screen:
¾
Scanning Option
Start IP Address:
Specify the Start IP Address.
End IP Address:
Specify the End IP Address.
VLAN ID:
Enter the VLAN ID. If blank, the switch will send the untagged
packets for scanning.
Scan:
Click the
Scan
button to scan the Hosts in the LAN.
¾
Scanning Result
Select:
Select the desired entry to be bound or deleted.
Host Name:
Displays the Host Name here.
IP Address:
Displays the IP Address of the Host.
MAC Address:
Displays the MAC Address of the Host.
VLAN ID:
Displays the VLAN ID here.
Port:
Displays the number of port connected to the Host.
Protect Type:
Displays the Protect Type of the entry.
Collision:
Displays the Collision status of the entry.
z
Warning: Indicates that the collision may be caused by the
MSTP function.
z
Critical: Indicates that the entry has a collision with the
other entries.
12.1.4 DHCP Snooping
Nowadays, the network is getting larger and more complicated. The amount of the PCs always
exceeds that of the assigned IP addresses. The wireless network and the laptops are widely used
and the locations of the PCs are always changed. Therefore, the corresponding IP address of the
PC should be updated with a few configurations. DHCP
（
Dynamic Host Configuration Protocol, the
155
