Figure 13-10 Event Config
The following entries are displayed on this screen:
¾
Event Table
Select:
Select the desired entry for configuration.
Index:
Displays the index number of the entry.
User:
Enter the name of the User or the community to which the
event belongs.
Description:
Give a description to the event for identification.
Type:
Select the event type, which determines the act way of the
network device in response to an event.
z
None: No processing.
z
Log: Logging the event.
z
Notify: Sending trap messages to the management station.
z
Log&Notify: Logging the event and sending trap messages to
the management station.
Owner:
Enter the name of the device or user that defined the entry.
Status:
Select Enable/Disable the corresponding event entry.
13.3.3 Alarm Config
On this page, you can configure Statistic Group and Alarm Group for RMON.
Choose the menu
SNMP
→
RMON
→
Alarm Config
to load the following page.
192
