TP-Link JetStream T3700G-52TQ, Руководство пользователя

Страница: 65 / 426

SNMP Trap status: Enable or disable SNMP trap of the Auto Copy Software
function.
Allow Downgrade: Enable or disable downgrade of the new members in the Auto
Copy Software function. If you choose enable, the member’s
software version is allowed to downgrade when copying
software from the master.
5.2
Application Example for Stack

Network Requirements
Establish a stack of ring topology with four T3700G-52TQ switches.

Network Diagram

Configuration Procedure

Configure switch A, B, C and D before physically connecting them:
Step Operation Description
1 Configure stack mode. Required. On Stack Management → Stack Config page,
configure the port’s stack mode as "Stack" in Stack Port
Config section.
2 Configure unit ID. Optional. On Stack Management → Stack Config page,
configure the unit ID of switch A, B, C and D as 1, 2, 3 and 4
respectively in
Stack Member Config section.
3 Configure the role of
the switch in the stack. Optional. On Stack Management → Stack Config page,
configure the role of switch A as Master, the role of switch B,
C, D as Member in
Role Config section.
4 Configure the Auto
Copy Software
function. Optional. On Stack Management → Auto Copy Software
page, enable Auto Copy Software function.

Connect the switches:
Connect switch A, B, C and D as the network diagram shows, and then power the switches on
to establish a stack.
Return to CONTENTS
52