Figure 14-23 Port Config
Configuration Procedure:
Select one or more ports and configure the relevant parameters. Then click
Apply
.
Entry Description:
UNIT:
Select the unit ID of the desired member in the stack.
Select:
Select your desired port for configuration. It is multi-optional.
Port:
Displays the port number.
Status:
Select Enable/Disable the 802.1X authentication feature for the
port.
Guest VLAN:
Specify the VLAN ID needed to enable the Guest VLAN function,
ranging from 0 to 4093. 0 indicates that the Guest VLAN function
is disabled.
The supplicants in the Guest VLAN can access the
specified network sources.
Port Control:
Specify the Control Mode for the port.
•
Auto:
In this mode, the port will normally work only after
passing the 802.1X Authentication.
•
Force-Authorized:
In this mode, the port can work normally
without passing the 802.1X Authentication.
•
Force-Unauthorized:
In this mode, the port is forbidden
working for its fixed unauthorized status.
Port Method:
Specify the Control Type for the port.
•
MAC Based:
Any client connected to the port should pass
the 802.1X Authentication for access.
•
Port Based:
All the clients connected to the port can access
the network on the condition that any one of the clients has
passed the 802.1X Authentication.
Max Request:
Specify the maximum number of attempts to send the
authentication packet. It ranges from 1 to 10 times and the
default is 10 times.
356
