TP-Link ARCHER C1200 Скачать руководство пользователя страница 8

Страница: 8 / 114

Chapter 1

Get to Know About Your Router

LED Explanation

Name

Status

Indication

(Power)

The system has started up successfully.

Flashing

The system is starting up or the firmware is being upgraded. Do
not disconnect or power off your router.

Off

Power is off.

(2.4GHz

Wireless)

The 2.4GHz wireless band is enabled.

Off

The 2.4GHz wireless band is disabled.

(5GHz Wireless)

The 5GHz wireless band is enabled.

Off

The 5GHz wireless band is disabled.

(Internet)

Green On

Internet service is available.

Orange On

The router’s Internet port is connected, but the internet service
is not available.

Off

The router’s Internet port is unplugged.

(Ethernet)

At least a powered-on device is connected to the router’s LAN
port.

Off

No powered-on device is connected to the router’s LAN port.

(USB)

The inserted USB device is ready to use.

Flashing

A USB device is being identified.

Off

No device is plugged into the USB port.

(WPS)

On/Off

This light remains on for 5 minutes when a WPS connection is
established, then turns off.

Flashing

WPS connection is in progress. This may take up to 2 minutes.

Содержание ARCHER C1200



















































































































Результаты поиска

Содержание ARCHER C1200

Отзывы:

Похожие инструкции для ARCHER C1200

Бренды по названию

Популярные бренды

TP-Link ARCHER C1200, Руководство пользователя

Результаты поиска

Содержание ARCHER C1200

Отзывы:

Похожие инструкции для ARCHER C1200

Бренды по названию

Популярные бренды