TP-Link ARCHER C1200 Скачать руководство пользователя страница 21

Страница: 21 / 114

Chapter 4

Set Up Internet Connection

Note:

It may take 1-2 minutes to make the settings valid.

Tips:

• If your internet connection type is

BigPond Cable

, please go to

Advanced

Network

Internet

to set your router.

• If you use

Dynamic IP

and

PPPoE

and you are provided with any other parameters that are not required on the page,

please go to

Advanced

Network

Internet

to complete the configuration.

• If you still cannot access the internet, refer to the

FAQ

section for further instructions.

4. 3.

Set Up an IPv6 Internet Connection

Your ISP provides information about one of the following IPv6 internet connection types:

PPPoE, Dynamic IP(SLAAC/DHCPv6), Static IP, 6to4 tunnel, Pass-Through (Bridge).

1. Visit

http://tplinkwifi.net

, and log in with your TP-Link ID or the password you set for

the router.

2. Go to

Advanced

IPv6

3. Enable IPv6 and select the internet connection type provided by your ISP.

Tips:

If you do not know what your internet connection type is, contact your ISP or judge according to the already known

information provided by your ISP.

4. Fill in information as required by different connection types. Red blanks must be filled

in.

1 )

Static IP:

Fill in blanks and click

Save

Содержание ARCHER C1200



















































































































Результаты поиска

Содержание ARCHER C1200

Отзывы:

Похожие инструкции для ARCHER C1200

Бренды по названию

Популярные бренды

TP-Link ARCHER C1200, Руководство пользователя

Результаты поиска

Содержание ARCHER C1200

Отзывы:

Похожие инструкции для ARCHER C1200

Бренды по названию

Популярные бренды