Toyota ZZT230 series, Руководство по ремонту

Страница: 596 / 821

)
)
01-385
DIAGNOSTICS
-
SUPPLEMENTAL RESTRAINT SYSTEM
Check side squib (LH).
Squib (LH)
Airbag
Sensor
Assembly
er
DLC3
DTC 80115147
Tc
HOI0$6 AB0!19
H10000 H01073
H12026
PREPARATION:
(a) Turn the ignition switch to LOCK.
(b) Disconnect negative (-) terminal cable from the battery,
and wait at least for 90 seconds.
(c) Connect the front side airbag assembly (LH) connector.
(d) Connect negative {-) terminal cable to the battery, and
wait at least for
2
seconds.
CHECK:
(a) Turn the ignition switch to LOOK. and wait at least for
20
second.
(b) Turn the ignition switch to ON, and wait at least for 20 se-
conds.
(c) Clear the DTC stored in memory (See page
Dl-326).
(d) Turn the ignition switch to LOCK, and wait at least for
20
seconds.
(e) Turn the ignition switch to ON, and wait at least for
20 se-
conds.
(I)
Check the DTC (See page Dl-326).
OK:
-
DTC
B0115/47 1s not output.
HINT:
Codes other than code 80115/47 may be output at this time, but
they are not relevant to this check.
Replace side alrbag assembly
(LH).
From the results of the above Inspection, the malfunctioning part can now be considered normal.
To make sure of this, use the simulation method to check.