Toyota ZZT230 series, Руководство по ремонту

Страница: 662 / 821

)
)
Dl-451
DIAGNOSTICS
SUPPLEMENTAL RESTRAINT SYSTEM
7
Check alrbag sensor assembly.
Door
Side Airbag
S
(LH)
ensor
-H-
ON
0
Airbag
Sensor
Assembly
-+ <-
DLC3
DTC 81144/81145135
CG
-
AB0118
Tc
PREPARATION:
(a) Turn the ignition switch to LOCK.
(b) Disconnect negative (-) terminal cable from the battery,
and wait at least for 90 seconds.
(c) Connect the door side airbag sensor (LH) connector and
airbag sensor assembly connector.
{d) Connect negative {-) terminal cable to the battery, and
wait at least for -2 seconds.
CHECK:
(a) Turn the ignition switch to ON, and wait at least for 20 se�
conds.
(b) Clear the DTC stored in memory (See page Dl-326).
(c) Turn the ignition switch to LOCK, and wait at least for 20
seconds.
(d)
T
u
r
n the Ignition switch to ON, and wait at least for 20 se­
conds.
(e) Check the DTC (See page Dl-326).
OK: DTC
35
Is not output.
HINT:
Codes other than code 35 may be output at this time, but they
are not relevant to this check.
G
Replace alrbeg sensor assembly.
From the
resuHs of the above Inspection, the malfunctioning part can now
be
considered
normal.
To make
sure of this, usa the simulation method to check.