Toyota ZZT230 series, Руководство по ремонту

Страница: 639 / 821

01-428
SUPPLEMENTAL RESTRAINT SYSTEM
8
DTC 811 40/32
out put
again?
irbag Sensor Side A
Assem bly (RH)
Airbag
Sensor
Assembly
ON
0
DLC3
CG
Tc
H0\012
All0119
H\0600 H01005 H13119
PREPARATION:
(a)
Connect the connector to the side airbag sensor assem­
bly
(RH).
(b)
Connect the connector to the airbag sensor assembly.
(c)
Connect negative (-) terminal cable to the battery, and
wait at least for
2
seconds.
CHECK:
(a) Turn the ignition switch to ON, and wait at least
for
20
se­
conds.
(b)
Clear the
DTC
stored in memory
(See step
5
on page
Dl-326).
(c) Turn the ignition switch to LOCK, and wait at least for
20
seconds.
(d) Turn the ignition switch to ON, and wait at least for
20
se­
conds.
(e) Check the DTC (See page
Dl-326).
OK:
DTC 81140/32
Is not output.
HINT:
Codes other than code
B
1140/32
may be output at this time, but
they are not relevant to this check.
G Go to step
9.
From the results of the above Inspection, the malfunctioning part can now
be
considered normal.
To make sure of this, use the simulation method to check.