Toyota ZZT230 series, Руководство по ремонту

Страница: 163 / 821

BS-12
Crankshaft
1ZZ--FE:
Thrust clearance
Thrust washer
lhickness
Main
journal
oN
clearance
Main journal diameter
Main bearing center wall thickness
Reference
Crank
pin diameter
Clrde runout
Main
journal taper and out� round
Crank pin taper
and out-of
round
2ZZ-GE:
Thrust clearance
Thrust
washer thickness
Main
journal oil
clearance
MalA journal diameter
Main
bearing
center
wall lhicknass
""'"'
"""'
CraAk piA d"1811l9ter
Circle
runout
MalA joumal laper and out-of round
Crank taper and
out-of
round
ENGINE
STD
0.04 - 0.24 mm {0.0016-0.0094 in.)
Maximum 0.30 mm (0.011 8 1n.)
2.430- 2.4a0 mm (0.0957 -0.0976 in.)
STD
0,015-0.032 mm (0.0006 -0.0013 in.)
Maximum 0.050 mm (0.0020 in.)
MarkO 47.998 - 48.000 mm (1.8897 - 1.8898 in.)
Marto; l 47.996 -47.998 mm {1.8896 - 1.8697 in.)
Marl(2 47.994 - 47.996 mm (1.8895- 1.8696 in.}
Mark 3 47.992-47.994 mm (1.8894- 1.88951n.)
MMk4 47.990 -47.992 mm (1.8893 - 1.8694 in.)
Mm5 47.988 -47.990 mm (1.8892 - 1.8893 in.)
Ma!X 1 1.993- 1.996 mm (0.0785 -0.0786 in.)
Mark2 1.996- 1.999 mm (O.Q786 -0.07871n.)
Mark3 1.999 - 2.002 mm {0.0787- 0.07881n.)
Mark4 2.002-2.005 mm {0.0788-0.0789 in.)
43.992-44.000 mm {1.7320- 1.7323 1n.)
Maximum 0.03 mm (0.0012 in.)
Maximum 0.02 mm (0.0008 in.)
Maximum 0.02 mm {0.0008 in.)
STD 0.04- 0.24 mm (0.0016-0.0094 in.)
Maximum 0.30 mm (0.011 8 in.)
2.430- 2.480 mm {0.0957 -0.0976 in.)
STD
0.016- 0.032 mm (0.0006- 0.0013 in.)
Maximum 0.050 mm (0.0020 in.)
MarkO 47.998 -48.000 mm {1.8897- 1.8898 in.)
Mark1 47.996-47.998 mm (1.8896 - 1.8897 in.)
Mark2 47.994 -47.996 mm (1.8895- 1.8896 in.)
Mark3 47.992 -47.994 mm (1.8894- 1.88951n.)
Mark4 47.990-47.992 mm (1.8893- 1.8894 in.)
M""'5 47.988 -47.990 mm (1.8892 - 1.8893 in.)
Mark 1 1.989- 1.992 mm(0.0783 -0.0784 1n.)
Mm2 1.992- 1.995 mm (0.0784 -0.0785 in.)
Marl<3 1.995-:- 1.998 mm (0.0785-0.0787 in.)
Mark4 1.998- 2.001 mm (0.0787-0.0788 in.)
MarkS 2.001 - 2.004 mm (0.0788 -0.0789 in.)
44.992 -45.000 mm {1.n13 - 1 .n11 in.)
Maximum 0.03 mm (0.0012 in.)
Maximum 0.02 mm (0.0008 in.)
Maximum 0.02 mm