Toyota SEQUOIA 2007 Скачать руководство пользователя страница 97

Страница: 97 / 484

2007 SEQUOIA from Aug. ’07 Prod. (OM34462U)

u13024

The SRS (Supplemental Restraint Sys-

tem) front airbags are designed to pro-
vide further protection for the driver

and front passenger in addition to the

primary safety protection provided by
the seat belts.

Your vehicle is equipped with “ADVANCED
AIRBAGS” designed based on US motor

vehicle safety standards (FMVSS208). The

airbag system controls airbag deployment
power for the driver and front passenger.

The driver airbag system consists of the

driver seat’s position sensor etc. The front
passenger’s airbag system consists of the

front passenger occupant classification

sensor etc.

In response to a severe frontal impact,

the SRS front airbags work with the seat

belts to help reduce injury by inflating.
The SRS front airbags help reduce injuries

mainly to the driver’s or front passenger’s

head  or  chest  caused  by  hitting  the  ve-
hicle  interior.
The  SRS  front  passenger  airbag  will  not

activate if there is no passenger sitting in
the front passenger seat. However, the

front passenger airbag may deploy if lug-

gage is put in the seat, or the seat belt
is buckled up, regardless of the presence

of an occupant in the seat. (As for the

front passenger occupant classification
system, see “Front passenger occupant

classification system” on page 103 in this

Section.)
Always wear your seat belt properly.

CAUTION

The SRS front airbag system is de-
signed only as a supplement to the

primary protection of the driver and

front passenger seat belt systems.
The driver and front passenger can

be killed or seriously injured by the

inflating airbags if they do not wear
the available seat belts properly.

During sudden braking just before

a collision, an unrestrained driver
or front passenger can move for-

ward into direct contact with or

close proximity to the airbag which
may then deploy during the colli-

sion. To ensure maximum protection

in an accident, the driver and all
passengers in the vehicle must

wear their seat belts properly. Wear-

ing a seat belt properly during an
accident reduces the chances of

death or serious injury or being

thrown out of the vehicle. For in-
structions and precautions concern-

ing the seat belt system, see “Seat

belts” on page 73 in this Section.

07 05.22

SRS driver airbag and front

passenger airbag

Содержание SEQUOIA 2007





































































































































































































































































































































































































































































































Результаты поиска

Содержание SEQUOIA 2007

Отзывы:

Toyota SEQUOIA 2007, Руководство пользователя, Страница: 97 / 484

Результаты поиска

Содержание SEQUOIA 2007

Отзывы: