Toyota SEQUOIA 2007 Скачать руководство пользователя страница 29

Страница: 29 / 484

2007 SEQUOIA from Aug. ’07 Prod. (OM34462U)

For vehicles sold in U.S.A.

This device complies with Part 15 of the
FCC Rules. Operation is subject to the

following  two  conditions:
(1)  This  device  may  not  cause  harmful
interference,  and  (2)  this  device  must

accept any interference received, includ-

ing interference that may cause unde-
sired operation.

NOTICE:

This equipment has been tested and

found to comply with the limits for a

Class B digital device, pursuant to Part
15 of the FCC Rules. These limits are

designed to provide reasonable protec-

tion against harmful interference in a
residential installation. This equipment

generates, uses and can radiate radio

frequency energy and, if not installed
and used in accordance with the instruc-

tions, may cause harmful interference to

radio communications. However, there is
no guarantee that interference will not

occur in a particular installation. If this

equipment does cause harmful interfer-
ence to radio or television reception,

which can be determined by turning the

equipment off and on, the user is en-
couraged to try to correct the interfer-

ence by one or more of the following

measures:

Reorient or relocate the receiving an-
tenna.

Increase the separation between the

equipment and receiver.

Connect the equipment into an outlet

on a circuit different from that to
which the receiver is connected.

Consult the dealer or an experienced

radio / TV technician for help.

FCC WARNING:

Changes or modifications not ex-
pressly approved by the party respon-

sible for compliance could void the

user’s authority to operate the equip-
ment.

07 05.22

Содержание SEQUOIA 2007





































































































































































































































































































































































































































































































Результаты поиска

Содержание SEQUOIA 2007

Отзывы:

Toyota SEQUOIA 2007, Руководство пользователя, Страница: 29 / 484

Результаты поиска

Содержание SEQUOIA 2007

Отзывы: