Toyota SEQUOIA 2007 Скачать руководство пользователя страница 245

Страница: 245 / 484

236

2007 SEQUOIA from Aug. ’07 Prod. (OM34462U)

Radio

AM  mode
When  you  select  the  AM  mode,  “AM”  will
appear  on  the  screen.
FM  mode
When  you  select  the  FM  mode,  “FM1”  or

“FM2” will appear on the display.
If the front audio system receives a traffic

announcement (TA) while the rear seat

audio system is in the radio mode,
“TRAF” will flash on the screen and the

rear seat audio system will turn off. When

the front audio receives a traffic an-
nouncement (TA), the rear seat audio sys-

tem cannot select the AM/FM mode.

Tape mode

“TAPE” appears on the screen while this

mode is selected.

Compact disc mode

“CD” appears on the screen while this

mode is selected.
The screen shows the track, or track and

disc number currently being played.

Error messages

If the player malfunctions, your audio sys-

tem will display following error messages.

“WAIT”:

The compact disc player unit

may be too hot. Allow the player to cool
down.

“ERR 1”:

The disc may be dirty, damaged

or inserted incorrectly (up

−

side down).

Clean the disc and re

−

insert it.

“ERR 3”:

There is a problem inside the

system. Eject the disc. Set the disc again.

“ERR 4”:

Over

−

current. Ask your Toyota

dealer to inspect.
If the malfunction still exists, take your

vehicle to your Toyota dealer.

4. “OFF” button

Push “OFF” button to turn off the rear
seat audio system.

REPLACING CONTROLLER BATTERY

For replacement, use a CR2025 lithium

battery or equivalent.

CAUTION

Special care should be taken that
small children do not swallow the re-

moved battery or components.

NOTICE

When replacing the battery, be care-
ful not to lose the components.

Replace only with the same or

equivalent type of battery recom-

mended by a Toyota dealer.

Dispose of used batteries according
to the local regulations.

07 05.22

Содержание SEQUOIA 2007





































































































































































































































































































































































































































































































Результаты поиска

Содержание SEQUOIA 2007

Отзывы:

Toyota SEQUOIA 2007, Руководство пользователя, Страница: 245 / 484

Результаты поиска

Содержание SEQUOIA 2007

Отзывы: