Toyota SEQUOIA 2007 Скачать руководство пользователя страница 246

Страница: 246 / 484

237

2007 SEQUOIA from Aug. ’07 Prod. (OM34462U)

u17007

Replace the battery by using the following

procedures:

1. Pull the case out while pushing the

lock release button to the side.

u17030

2. Remove the discharged battery.
3. Put in a new battery with the positive

(+) side up.
Put in the case securely.

NOTICE

Make sure that the positive side of
the controller battery is facing cor-

rectly.

Do not replace the battery with wet
hands. Water may cause rust.

Do not touch or move any compo-
nents inside of the controller, or it

may interfere with proper operation.

Be careful not to bend the electrode
of the controller battery insertion

and that dust or oil does not ad-

here to the transmitter case.

Close the battery case securely.

After replacing the battery, check that the
controller operates properly. If the control-

ler still does not operate properly, contact

your Toyota dealer.

07 05.22

Содержание SEQUOIA 2007





































































































































































































































































































































































































































































































Результаты поиска

Содержание SEQUOIA 2007

Отзывы:

Toyota SEQUOIA 2007, Руководство пользователя, Страница: 246 / 484

Результаты поиска

Содержание SEQUOIA 2007

Отзывы: