Toyota SEQUOIA 2007 Скачать руководство пользователя страница 387

Страница: 387 / 484

378

2007 SEQUOIA from Aug. ’07 Prod. (OM34462U)

WEIGHT LIMITS
Before towing, make sure the total trail-

er weight, gross combination weight,
gross vehicle weight, gross axle weight

and trailer tongue load are all within

the limits.

The total trailer weight and tongue load

can be measured with platform scales
found at a highway weighing station, build-

ing supply company, trucking company,

junk yard, etc.

CAUTION

The maximum gross trailer weight
(trailer weight plus cargo weight)

must never exceed the following.

Two

−

wheel drive models

2948 kg (6500 lb.)

Four

−

wheel drive models

2812 kg (6200 lb.)

If towing a trailer and cargo weigh-
ing over 907 kg (2000 lb.), it is

necessary to use a sway control

device with sufficient capacity. The
combination of the gross trailer

weight added to the total weight of

the vehicle, occupants and vehicle
cargo must never exceed a total of

5352  kg.  (11800  lb.)
Exceeding  the  maximum  weight  of
the  trailer,  the  vehicle,  or  the  ve-

hicle and trailer combination, can

cause an accident resulting in seri-
ous personal injuries.

u20011

Trailer hitch assemblies have differ-
ent weight capacities established by

the hitch manufacturer. Even though

the vehicle may be physically capa-
ble of towing a higher weight, the

operator must determine the maxi-

mum weight rating of the particular
hitch assembly and never exceed

the maximum weight rating speci-

fied for the trailer

−

hitch. Exceeding

the maximum weight rating set by

the trailer hitch manufacturer can

cause an accident resulting in seri-
ous personal injuries.

07 05.22

Содержание SEQUOIA 2007





































































































































































































































































































































































































































































































Результаты поиска

Содержание SEQUOIA 2007

Отзывы:

Toyota SEQUOIA 2007, Руководство пользователя, Страница: 387 / 484

Результаты поиска

Содержание SEQUOIA 2007

Отзывы: