Toyota SEQUOIA 2007 Скачать руководство пользователя страница 46

Страница: 46 / 484

2007 SEQUOIA from Aug. ’07 Prod. (OM34462U)

LOCKING

AND

UNLOCKING

WITH

POWER DOOR LOCK SWITCH
Push the switch.

To lock: Push the switch down on the

front side.
To unlock: Push the switch down on the

rear  side.
Operating  the  power  door  lock  switch  si-
multaneously  locks  or  unlocks  the  back

door. (See “Side doors” on page 24 in this

Section.)
Vehicles with wireless remote control sys-

tem—
To lock or unlock the back door, see

“Wireless remote control” on page 18 in

this Section.

u12033

To open the hood:

1. Pull the hood lock release lever. The

hood will spring up slightly.

CAUTION

Before driving, be sure that the hood
is closed and securely locked. Other-

wise, the hood may open unexpected-

ly while driving and an accident may
occur.

u12063

2. In front of the vehicle, pull up the

auxiliary catch lever and lift the
hood.

Before closing the hood, check to see that
you have not forgotten any tools, rags,

etc. Then lower the hood make sure it

locks into place. If necessary, press down
gently on the front edge to lock it.

07 05.22

Hood

Содержание SEQUOIA 2007





































































































































































































































































































































































































































































































Результаты поиска

Содержание SEQUOIA 2007

Отзывы:

Toyota SEQUOIA 2007, Руководство пользователя, Страница: 46 / 484

Результаты поиска

Содержание SEQUOIA 2007

Отзывы: