Toyota SEQUOIA 2007 Скачать руководство пользователя страница 79

Страница: 79 / 484

2007 SEQUOIA from Aug. ’07 Prod. (OM34462U)

u13240

Second seats (separate type)

u13189

Third seats (outside)

For your safety and comfort, adjust the

head restraint before driving.

To raise: Pull it up.
To lower: Push it down while pressing the

lock release button.
Center head restraint of the bench type

second seats—When an occupant sits on

the center position of the second seats,
always pull up the center head restraint of

the  second  seats  to  the  lock  position.
The  head  restraint  is  most  effective  when
it  is  close  to  your  head.  Therefore,  using

a cushion on the seatback is not recom-

mended.

CAUTION

Adjust the center of the head re-
straint so that it is closet to the

top of your ears.

After adjusting the head restraint,
make sure it is locked in position.

Do not drive with the head re-
straints removed.

u13257

Center head restraint of the third

seat—The removed head restraint can
be stored in the auxiliary box on the

rear left side panel.

Store the head restraint in the auxiliary

box when it is not in use.
To store the head restraint:

1. Remove the head restraint.

07 05.22

Содержание SEQUOIA 2007





































































































































































































































































































































































































































































































Результаты поиска

Содержание SEQUOIA 2007

Отзывы:

Toyota SEQUOIA 2007, Руководство пользователя, Страница: 79 / 484

Результаты поиска

Содержание SEQUOIA 2007

Отзывы: