Toyota SEQUOIA 2007 Скачать руководство пользователя страница 78

Страница: 78 / 484

2007 SEQUOIA from Aug. ’07 Prod. (OM34462U)

When reinstalling the seat, make
sure the seat is securely locked by

pushing forward and rearward on

the top of the seatback or by trying
to pull up the edge of the bottom

cushion. Failure to do so will pre-

vent the seat belt from operating
properly.

Install each seat in the same posi-

tion from which it was removed.
Failure to do so will prevent third

seat occupants from using seat

belts properly.

Do not reinstall the seat with its

back facing forward.

Make sure the seat is securely

locked in the proper position.

NOTICE

Avoid putting heavy loads on the re-
moved seat. The metallic tips of the

seat leg may be damaged and the

seat cannot be reinstalled.

u13120

If the seat legs are locked in the wrong

position, pull up the left side lever un-
der the seat. Then lift and remove the

seat.

u13238

Front seats

u13239

Second seats (bench type)

07 05.22

Head restraints

Содержание SEQUOIA 2007





































































































































































































































































































































































































































































































Результаты поиска

Содержание SEQUOIA 2007

Отзывы:

Toyota SEQUOIA 2007, Руководство пользователя, Страница: 78 / 484

Результаты поиска

Содержание SEQUOIA 2007

Отзывы: