Toyota Prius HSD 2006 Скачать руководство пользователя страница 328

Страница: 328 / 465

328

“ABS” warning light
The light comes on when the “IG

−

ON”

mode is enabled. If the anti

−

lock brake

system works properly, the light turns

off after the “READY” light comes on.

Thereafter, if the system malfunctions,
the light comes on again.

When the “ABS” warning light is on (and
the brake system warning light is off), the

anti

−

lock brake system does not operate,

but the brake system still operates con-
ventionally.
When the “ABS” warning light is on (and

the brake system warning light is off), the
anti

−

lock brake system does not operate

so that the wheels could lock up during

a sudden braking or braking on slippery
road surfaces.

If any of the following conditions oc-
curs, this indicates a malfunction some-

where in the components monitored by

the warning light system. Contact your
Toyota dealer as soon as possible to

service the vehicle.

The light does not come on when the

“IG

−

ON” mode is enabled, or the

“READY” light remains on.

The light comes on while you are driv-

ing.

A warning light turning on briefly during

operation does not indicate a problem.

CAUTION

If the “ABS” warning light remains on
together with the red brake system

warning light, immediately stop your

vehicle at a safe place and contact
your Toyota dealer.
In this case, not only the anti

−

lock

brake system will fail but also the
vehicle will become extremely unsta-

ble during braking.

Any of the following conditions may oc-

cur, but does not indicate a malfunc-
tion:

The light may stay on for about 60

seconds after the “IG

−

ON” mode is en-

abled. It is normal if it turns off after

a while.

Depressing the brake pedal repeatedly

may turn on the light. It is normal if

it turns off after a few seconds.

BRAKE ASSIST SYSTEM
When you slam the brakes on, the

brake assist system judges as an emer-

gency stop and provides more powerful
braking for a driver who cannot hold

down the brake pedal firmly.

When you slam the brakes on, more pow-

erful braking will be applied. At this time,

you may hear a sound in the engine
compartment. This does not indicate a

malfunction.
The brake assist system becomes opera-
tive after the vehicle has accelerated to

a speed in excess of approximately 10

km/h (6 mph). It stops operating when the
vehicle decelerates to a speed below

approximately 5 km/h (3 mph).
For an explanation of this system’s warn-

ing light, see “Service reminder indicators

and warning buzzers” on page 125.

Содержание Prius HSD 2006


















































































































































































































































































































































































































































































Результаты поиска

Содержание Prius HSD 2006

Отзывы:

Похожие инструкции для Prius HSD 2006

Бренды по названию

Популярные бренды

Toyota Prius HSD 2006, Руководство пользователя

Результаты поиска

Содержание Prius HSD 2006

Отзывы:

Похожие инструкции для Prius HSD 2006

Бренды по названию

Популярные бренды