Toyota Prius HSD 2006 Скачать руководство пользователя страница 359

Страница: 359 / 465

359

50p045c

Booster

battery

Negative

terminal

(“–” mark)

Jumper

cable

c. Connect the clamp of the negative

(black) jumper cable to the negative
(–) terminal on the booster battery.

d. Connect the clamp at the other end

of the negative (black) jumper cable

to a solid, stationary, unpainted, me-

tallic point of the vehicle with the
discharged battery.

The recommended connecting point is

shown in the following illustration:

50p080a

Connecting point

CAUTION

When making the connections, to
avoid serious injury, do not lean over

the battery or accidentally let the

jumper cables or clamps touch any-
thing except the correct battery termi-

nals or the ground.

9. Charge the discharged battery with the

jumper cables connected for approxi-
mately 5 minutes. At this time, run the

engine in the vehicle with the booster
battery at about 2000 rpm with the ac-

celerator pedal lightly depressed.

10. Start the hybrid system. Make sure the

“READY” light is on. If the hybrid bat-

tery warning light comes on in the mul-
ti

−

information display, the hybrid battery

is also discharged. Contact your Toyota

dealer.

11. Carefully disconnect the cables in the

exact reverse order: the negative cable

and then the positive cable.

12. Carefully dispose of the battery cover

cloths—they may now contain sulfuric
acid.

13. If removed, replace all the battery vent

plugs.

If the cause of your 12 volt battery dis-

charging is not apparent (for example,
lights left on), you should have it checked

at your Toyota dealer.

If the first start attempt is not success-

ful...

Check that the clamp on the jumper
cables are tight. Recharge the discharged

battery with the jumper cables connected

for several minutes and restart your hybrid
system in the normal way.
If the another attempt is not successful,
the battery may be depleted. Have it

checked at your Toyota dealer.

Содержание Prius HSD 2006


















































































































































































































































































































































































































































































Результаты поиска

Содержание Prius HSD 2006

Отзывы:

Toyota Prius HSD 2006, Руководство пользователя, Страница: 359 / 465

Результаты поиска

Содержание Prius HSD 2006

Отзывы: