Toyota Prius HSD 2006 страница 323 Скачать руководство пользователя

Страница: 323 / 465

323

Oil is also used to lubricate the stems

of the intake valves. Some of this oil

is sucked into the combustion chamber
together with the intake air and is

burned along with the fuel. High tem-

perature exhaust gases also burn the
oil used to lubricate the exhaust valve

stems.

The amount of engine oil consumed de-
pends on the viscosity of the oil, the

quality of the oil and the conditions the

vehicle is driven under.

More oil is consumed by high

−

speed driv-

ing and frequent acceleration and decel-
eration.
A new engine consumes more oil, since

its pistons, piston rings and cylinder walls
have not become conditioned.

Oil consumption:

Max. 1.0 L per 1000

km (1.1 qt./600 miles, 0.9 Imp.qt./600

miles)

When judging the amount of oil con-

sumption, note that the oil may become

diluted and make it difficult to judge
the true level accurately.

As an example, if a vehicle is used for

repeated short trips, and consumes a nor-

mal amount of oil, the dipstick may not
show any drop in the oil level at all, even

after 1000 km (600 miles) or more. This

is because the oil is gradually becoming
diluted with fuel or moisture, making it

appear that the oil level has not changed.
The diluting ingredients evaporate out
when the vehicle is then driven at high

speeds, as on an expressway, making it

appear that oil is excessively consumed
after driving at high speeds.

IMPORTANCE OF ENGINE OIL LEVEL
CHECK

One of the most important points in prop-

er vehicle maintenance is to keep the en-
gine oil at the optimum level so that oil

function will not be impaired. Therefore, it
is essential that the oil level be checked

regularly. Toyota recommends that the oil

level be checked every time you refuel
the vehicle.

NOTICE

Failure to check the oil level regularly
could lead to serious engine trouble

due to insufficient oil.

For detailed information on oil level check,

see “Checking the engine oil level” on

page 400.

Содержание Prius HSD 2006


















































































































































































































































































































































































































































































Результаты поиска

Содержание Prius HSD 2006

Отзывы:

Похожие инструкции для Prius HSD 2006

Бренды по названию

Популярные бренды

Toyota Prius HSD 2006, Руководство пользователя

Результаты поиска

Содержание Prius HSD 2006

Отзывы:

Похожие инструкции для Prius HSD 2006

Бренды по названию

Популярные бренды