Toyota Prius HSD 2006 страница 27 Скачать руководство пользователя

Страница: 27 / 465

(a) The hybrid system was not turned

off and the transaxle was in a posi-

tion other than “P”.

When the driver’s door is opened with the

hybrid system in “ACC” or “IG

−

ON” and

with the transaxle in a position other than
“P”.

Inside alarm: Beeps continuously
Multi

−

information display: Warning mes-

sage
Alarms will be turned off by any of the

following operations:

Closing the driver’s door

Pressing the “P” position switch

Turning off the hybrid system

(b) The smart key was brought outside

the vehicle with the transaxle in a

position other than “P”.

When the driver’s door is opened or

closed with the hybrid system not to be

turned off and with the transaxle in a
position other than “P”, it is determined

that the smart key is not in the vehicle.

Inside alarm: Beeps continuously
Outside alarm: Beeps continuously
Warning light: On
Alarms will be turned off by any of the

following operations:

Pressing the “P” position switch

Bringing the smart key inside the ve-

hicle

Turning off the hybrid system

(c) The hybrid system was not turned

off with the transaxle in “P”.

When the driver’s door is opened with the

hybrid system in “ACC” and with the

transaxle in “P”.

Inside alarm: 3 beeps

In the “IG

−

ON” mode, an alarm will not

sound.

(d) The smart key was brought outside

the vehicle.

When the driver’s door is opened or
closed with the hybrid system not to be

turned off (and with the transaxle in “P”),

it is determined that the smart key is not
in the vehicle.

Inside alarm: One beep
Outside alarm: 3 beeps
Warning light: On
(e) Locking with smart function was at-

tempted with the hybrid system not

to be turned off.

When you attempt to lock all the doors

using smart locking function with the hy-
brid system not to be turned off and with

the transaxle in a position other than “P”.

Outside alarm: One beep (sounds for 2

seconds.)
Warning light: On
At this time, the doors cannot be

locked.

Содержание Prius HSD 2006


















































































































































































































































































































































































































































































Результаты поиска

Содержание Prius HSD 2006

Отзывы:

Похожие инструкции для Prius HSD 2006

Бренды по названию

Популярные бренды

Toyota Prius HSD 2006, Руководство пользователя

Результаты поиска

Содержание Prius HSD 2006

Отзывы:

Похожие инструкции для Prius HSD 2006

Бренды по названию

Популярные бренды