Toyota Prius HSD 2006 Скачать руководство пользователя

Страница: 81 / 465

22p030f

In the following cases, contact your Toyota

dealer as soon as possible:

Any of the SRS side airbags and cur-
tain shield airbags have been inflated.

The portion of the doors (shaded in the
illustration) were involved in an acci-

dent that was not severe enough to

cause the SRS side airbags and cur-
tain shield airbags to inflate.

The surface of the seats with the side

airbag (shaded in the illustration) is
scratched, cracked, or otherwise dam-

aged.

The portion of the front pillars, rear

pillars or roof side rail garnishes (pad-

ding) containing the curtain shield air-
bags inside (shaded in the illustration)

is scratched, cracked, or otherwise

damaged.

NOTICE

Do not disconnect the battery cables
before contacting your Toyota dealer.

Your vehicle is equipped with a front

passenger occupant classification sys-

tem. This system detects the conditions
1. through 4. in the table on page 84

and based on these conditions activates

or deactivates the following systems;

Front passenger airbag

Front passenger’s seat belt pretension-
er

The system monitors the weight and

load on the front passenger seat, and
the seat belt buckle switch to determine

conditions 1. through 4.
In order for the system to detect the

conditions correctly, do not do any of

the following:

Apply a heavy load to the front pas-

senger seat.

Attach a commercial seatback table,

etc. to the front passenger seat seat-

back.

Put weight on the front passenger seat

by putting your hands or feet on the
seatback from the rear passenger seat.

—Front passenger occupant

classification system

Содержание Prius HSD 2006


















































































































































































































































































































































































































































































Результаты поиска

Содержание Prius HSD 2006

Отзывы:

Похожие инструкции для Prius HSD 2006

Бренды по названию

Популярные бренды

Toyota Prius HSD 2006, Руководство пользователя

Результаты поиска

Содержание Prius HSD 2006

Отзывы:

Похожие инструкции для Prius HSD 2006

Бренды по названию

Популярные бренды