Toyota Prius HSD 2006 страница 74 Скачать руководство пользователя

Страница: 74 / 465

22p024c

The SRS (Supplemental Restraint Sys-

tem) side airbags and curtain shield air-
bags are designed to provide further

protection for the driver, front passen-

ger and rear outboard passengers in
addition to the primary safety protec-

tion provided by the seat belts.

In response to a severe side impact, the

SRS side airbags and curtain shield air-

bags work with the seat belts to help
reduce injury by inflating. The SRS side

airbags help reduce injuries mainly to the

driver’s or front passenger’s chest and the
SRS curtain shield airbags help reduce

injuries mainly to the driver’s, front pas-

senger’s or rear outboard passenger’s
head.
The SRS side airbag and curtain shield

airbag on the passenger side are activated
even with no passenger in the front seat

or rear outboard seat.
The SRS curtain shield airbags may acti-

vate even when the side airbags are not

activated.
Always wear your seat belt properly.

CAUTION

The SRS side airbag and curtain
shield airbag system is designed

only as a supplement to the prima-

ry protection of the driver, front
passenger and rear outside passen-

ger seat belt systems. To ensure

maximum protection in an accident,
the driver and all passengers in the

vehicle must wear their seat belts

properly. Wearing a seat belt prop-
erly during an accident reduces the

chances of death or serious injury

or being thrown out of the vehicle.
For instructions and precautions

concerning the seat belt system,

see “Seat belts” on page 58.

SRS side airbags and curtain

shield airbags

Содержание Prius HSD 2006


















































































































































































































































































































































































































































































Результаты поиска

Содержание Prius HSD 2006

Отзывы:

Похожие инструкции для Prius HSD 2006

Бренды по названию

Популярные бренды

Toyota Prius HSD 2006, Руководство пользователя

Результаты поиска

Содержание Prius HSD 2006

Отзывы:

Похожие инструкции для Prius HSD 2006

Бренды по названию

Популярные бренды