Toyota Prius HSD 2006 Скачать руководство пользователя страница 77

Страница: 77 / 465

Deployment of the airbags happen in a

fraction of a second, so the airbags must

inflate with considerable force. While the
system is designed to reduce serious inju-

ries, it may also cause minor burns or

abrasions and swelling.
Front seats as well as parts of the front

and rear pillars, and roof side rail may be

hot for several minutes, but the airbags
themselves will not be hot. The airbags

are designed to inflate only once.

CAUTION

SRS side airbags and curtain shield
airbags inflate with considerable

force. To reduce the possibility of

death or serious injury when they in-
flate, the driver, front passenger and

rear outside passengers must:

Wear their seat belts properly.

Remain properly seated with their

backs upright and against the seats
at all times.

22p028d

Do not allow anyone to lean against
the door when the vehicle is in use,

since the side airbag and curtain

shield airbag could inflate with con-
siderable speed and force. Other-

wise, he/she may be killed or seri-

ously injured. Special care should
be taken especially when you have

a small child in the vehicle.

Sit up straight and well back in the
seat, distributing your weight even-

ly in the seat. Do not apply exces-

sive weight to the outer side of the
seats with a side airbag, and to the

front pillar, rear pillar and roof side
rail with a curtain shield airbag.

22p207a

Do not allow anyone to get his/her
head closer to the area where the

side airbag and curtain shield air-

bag inflate, since these airbags
could inflate with considerable

speed and force. Otherwise, he/she

may be killed or seriously injured.
Special care should be taken espe-

cially when you have a small child

in the vehicle.

Содержание Prius HSD 2006


















































































































































































































































































































































































































































































Результаты поиска

Содержание Prius HSD 2006

Отзывы:

Toyota Prius HSD 2006, Руководство пользователя, Страница: 77 / 465

Результаты поиска

Содержание Prius HSD 2006

Отзывы: