Toyota Land Cruiser 2005 Скачать руководство пользователя страница 267

Страница: 267 / 351

254

JUMP STARTING PROCEDURE

1. If the booster battery is installed in

another vehicle, make sure the vehicles
are not touching. Turn off all unneces-

sary lights and accessories.
When boosting, use the battery of

matching or higher quality. Any other

battery may be difficult to jump start
with.
If jump starting is difficult, charge the

battery for several times.

2. If required, remove all the vent plugs

from the booster and discharged batter-
ies. Lay a cloth over the open vents

on the batteries. (This helps reduce the

explosion hazard, personal injuries and
burns.)

3. If the engine in the vehicle with the

booster battery is not running, start it

and let it run for a few minutes. During

jump starting, run the engine at about
2000 rpm with the accelerator pedal

lightly depressed.

Discharged battery

Positive

terminal

(“+” mark)

Jumper

cable

Booster

battery

Positive terminal

(“+” mark)

4. Make the cable connections in the or-

der a, b, c, d.
a. Connect the clamp of the positive

(red) jumper cable to the positive
(+) terminal on the discharged bat-

tery.

b. Connect the clamp at the other end

of the positive (red) jumper cable to

the positive (+) terminal on the

booster battery.

Discharged battery

Booster

battery

Negative

terminal (“–” mark)

Jumper cable

c. Connect the clamp of the negative

(black) jumper cable to the negative
(–) terminal on the booster battery.

d. Connect the clamp at the other end

of the negative (black) jumper cable

to a solid, stationary, unpainted, me-

tallic point of the vehicle with the
discharged battery.

The recommended connecting point is

shown in the following illustration:

Содержание Land Cruiser 2005
































































































































































































































































































































































Результаты поиска

Содержание Land Cruiser 2005

Отзывы:

Похожие инструкции для Land Cruiser 2005

Бренды по названию

Популярные бренды

Toyota Land Cruiser 2005, Руководство пользователя

Результаты поиска

Содержание Land Cruiser 2005

Отзывы:

Похожие инструкции для Land Cruiser 2005

Бренды по названию

Популярные бренды