Toyota Land Cruiser 2005 Скачать руководство пользователя страница 49

Страница: 49 / 351

I13380b

1. SEAT POSITION AND SEAT CUSHION

ANGLE ADJUSTING SWITCH

Move the control switch in the desired
direction.

Releasing  the  switch  will  stop  the  seat  at
that  position.
Do  not  place  anything  under  the  front

seats, as this might interfere with the seat
movement.

2. SEATBACK

ANGLE

ADJUSTING

SWITCH

Move the control switch in the desired

direction.

Releasing the switch will stop the seat-

back at that position.

CAUTION

Avoid reclining the seatback any
more than needed. The seat belts pro-

vide maximum protection in a frontal

or rear collision when the driver and
the front passenger are sitting up

straight and well back in the seats. If

you are reclined, the lap belt may
slide past your hips and apply re-

straint forces directly to the abdomen

or your neck may contact the shoul-
der belt. In the event of a frontal

collision, the more the seat is re-

clined, the greater the risk of death
or personal injury.

3. SEAT LUMBAR SUPPORT ADJUST-

ING SWITCH

Push the control switch on either side.

The amount of lumbar support will change
while the switch is pushed.

—Adjusting front seats

Содержание Land Cruiser 2005
































































































































































































































































































































































Результаты поиска

Содержание Land Cruiser 2005

Отзывы:

Похожие инструкции для Land Cruiser 2005

Бренды по названию

Популярные бренды

Toyota Land Cruiser 2005, Руководство пользователя

Результаты поиска

Содержание Land Cruiser 2005

Отзывы:

Похожие инструкции для Land Cruiser 2005

Бренды по названию

Популярные бренды