Toyota Land Cruiser 2005 Скачать руководство пользователя страница 100

Страница: 100 / 351

13c568

Move seat fully back

A forward

−

facing child restraint sys-

tem should be allowed to be

installed on the front passenger

seat only when it is unavoidable.
Always move the seat as far back

as possible, because the front pas-

senger airbag could inflate with
considerable

speed

and

force.

Otherwise, the child may be killed

or seriously injured.

On vehicle with side airbags and
curtain shield airbags, do not allow

the child to lean his/her head or

any part of his/her body against the
door or the area of the seat, front

or rear pillar, front, center or rear

garnish or roof interior from which
the side airbags or curtain shield

airbags deploy even if the child is

seated in a child restraint system.
It is dangerous if the side airbag

and curtain shield airbag inflate,

and the impact could cause death
or serious injury to the child.

13c501b

Do not install a child restraint sys-
tem on the third seat if it interferes

with the lock mechanism of the sec-

ond seats. Otherwise, the child or
second seat occupant(s) may be

killed or serious injured in case of

sudden braking or a collision.

If the driver’s seat position does

not allow sufficient space for safe

installation, install the child re-
straint system on the second right

seat.

Содержание Land Cruiser 2005
































































































































































































































































































































































Результаты поиска

Содержание Land Cruiser 2005

Отзывы:

Похожие инструкции для Land Cruiser 2005

Бренды по названию

Популярные бренды

Toyota Land Cruiser 2005, Руководство пользователя

Результаты поиска

Содержание Land Cruiser 2005

Отзывы:

Похожие инструкции для Land Cruiser 2005

Бренды по названию

Популярные бренды