Toyota Land Cruiser 2005 Скачать руководство пользователя страница 70

Страница: 70 / 351

NOTICE

Do not perform any of the following

changes

without

consulting

your

Toyota dealer. Such changes can

interfere with proper operation of the

seat belt pretensioners in some

cases.

Installation of electronic devices

such as a mobile two

−

way radio,

cassette tape player or compact
disc player

Repairs on or near the front seat
belt retractor assemblies

Modification of the front end struc-

ture

Attachment of a grille guard (bull

bar, kangaroo bar, etc.), snowplow,

winches or any other equipment to

the front end

Repairs made on or near the front

fenders, front end structure or con-
sole

This indicator comes on when the igni-

tion key is turned to the “ON” position.
It goes off after about 6 seconds. This

means the seat belt pretensioners are

operating properly.

This warning light system monitors the

airbag sensor assembly, front airbag sen-
sors, side and curtain shield airbag sen-

sors, curtain shield airbag sensors, driv-

er’s seat position sensor, driver’s seat belt
buckle switch, seat belt pretensioner as-

semblies, inflators, warning light, roll sens-

ing of curtain shield airbags off indicator
light, interconnecting wiring and power

sources. (For details, see “Service remind-

er indicators and warning buzzers” on
page 122.)

If any of the following conditions occurs,

this indicates a malfunction of the airbags

or seat belt pretensioners. Contact your
Toyota dealer as soon as possible.

The light does not come on when the

ignition key is turned to the “ON” posi-
tion or remains on for more than 6

seconds or flashes.

The light comes on or starts flashing

while driving.

If any seat belt does not retract or can
not be pulled out due to a malfunction

or activation of the relevant seat belt

pretensioner.

The seat belt pretensioner assembly or

surrounding area has been damaged.

Содержание Land Cruiser 2005
































































































































































































































































































































































Результаты поиска

Содержание Land Cruiser 2005

Отзывы:

Бренды по названию

Популярные бренды

Toyota Land Cruiser 2005, Руководство пользователя

Результаты поиска

Содержание Land Cruiser 2005

Отзывы:

Бренды по названию

Популярные бренды