Toyota Land Cruiser 2005 Скачать руководство пользователя страница 263

Страница: 263 / 351

250

Keep the front wheels in proper

alignment.

Avoid hitting the curb and

slow down on rough roads. Improper
alignment not only causes faster tire

wear but also puts an extra load on

the engine, which, in turn, wastes fuel.

Keep the bottom of your vehicle free

from mud, etc.

This not only lessens

weight but also helps prevent corro-
sion.

Keep your vehicle tuned

−

up and in

top shape.

A dirty air cleaner, improp-

er valve clearance, dirty plugs, dirty oil

and grease, brakes not adjusted, etc.
all lower engine performance and con-

tribute to poor fuel economy. For longer

life of all parts and lower operating
costs, keep all maintenance work on

schedule, and if you often drive under

severe conditions, see that your vehicle
receives more frequent maintenance.

(For scheduled maintenance informa-

tion, please refer to the “Scheduled
Maintenance Guide” or “Owner’s Manu-

al Supplement”.)

CAUTION

Never turn off the engine to coast
down hills. Your power steering and

brake booster will not function with-

out the engine running. Also, the
emission control system operates

properly only when the engine is run-

ning.

Содержание Land Cruiser 2005
































































































































































































































































































































































Результаты поиска

Содержание Land Cruiser 2005

Отзывы:

Похожие инструкции для Land Cruiser 2005

Бренды по названию

Популярные бренды

Toyota Land Cruiser 2005, Руководство пользователя

Результаты поиска

Содержание Land Cruiser 2005

Отзывы:

Похожие инструкции для Land Cruiser 2005

Бренды по названию

Популярные бренды