Toyota Land Cruiser 2005 Скачать руководство пользователя страница 63

Страница: 63 / 351

When a passenger’s shoulder belt is com-

pletely extended and is then retracted

even slightly, the belt is locked in that
position and cannot be extended. This fea-

ture is used to hold the child restraint

system securely. (For details, see “Child
restraint” on page 76.) To free the belt

again, fully retract the belt and then pull

the belt out once more.
If the seat belt cannot be pulled out of the

retractor, firmly pull the belt and release

it. You will then be able to smoothly pull
the belt out of the retractor.

CAUTION

After inserting the tab, make sure
the tab and buckle are locked and

that the lap and shoulder portions

of the belt are not twisted.

Do not insert coins, clips, etc. in

the buckle as this may prevent you

from properly latching the tab and
buckle.

If the seat belt does not function
normally, immediately contact your

Toyota dealer. Do not use the seat

until the seat belt is fixed, because
it cannot protect an adult occupant

or your child from injury.

Take up

slack

Keep as low on hips as possible

Too high

Adjust the position of the lap and

shoulder belts.

Position the lap belt as low as possible

on your hips–not on your waist, then ad-
just it to a snug fit by pulling the shoulder

portion upward through the latch plate.

CAUTION

Both high

−

positioned lap belts and

loose

−

fitting belts could cause seri-

ous injuries due to sliding under the

lap belt during a collision or other
unintended event. Keep the lap belt

positioned as low on hips as pos-

sible.

Do not place the shoulder belt un-

der your arm.

Содержание Land Cruiser 2005
































































































































































































































































































































































Результаты поиска

Содержание Land Cruiser 2005

Отзывы:

Похожие инструкции для Land Cruiser 2005

Бренды по названию

Популярные бренды

Toyota Land Cruiser 2005, Руководство пользователя

Результаты поиска

Содержание Land Cruiser 2005

Отзывы:

Похожие инструкции для Land Cruiser 2005

Бренды по названию

Популярные бренды